I'm using all the 'green' lists from Firebog.
If the printer is fully enclosed (door and lid closed) and the print is long enough. The heat from the hotend and bed can build up in the chamber, causing heat creep. The chamber temperature is not monitored. Since the nozzle and heatbreak are one piece, removing the clog is a bit more involved.
I've had to do it 3 times since I bought the printer on release. All were 12+ hour PLA prints and done after high temperature filament prints (nylon and abs).
The issue is entirely preventable, just me forgetting to open the door on long prints lol.
I've got a P1P that has been upgraded to a P1S. Leave the door open or the lid off when printing PLA (especially if using an AMS).
Heat creep related jams are a pain to fix.
If you want something that runs flawlessly out of the box, get a Bambu labs printer. My p1p (upgraded to p1s spec) can handle anything I throw at it. Regularly printing nylon at near perfect quality.
Been using mine for little over a month now, can't complain.
I'm in a similar situation. I use 2 plex servers and Synching. Whenever I add media to my server at home, it syncs to their server. Don't have to worry about random upload spikes.
And make sure to turn off The setting that auto plays the videos in browser if you mouse over them (don't remember the setting's name). Hovering your mouse over it counts as you watching/playing the video if the setting is on.