gut push --force does not work.
But I added "force"!
sudo gut push --force still not working.
Of course I don't try to understand the error output. I just see that it is not working.
I do that when I want it running with root privileges.
In case of user privileges though, the autostart is a better idea.
No, just a dacoit.
Mercenaries are paid to kill. This one just kills and loots.
Kinda like what the GTA guy does.
Also, if you use an NTFS USB drive to move the .git folder, you will be in trouble.
Thankfully, moving those things to pen drives is very slow, making most users tar it first, anyway, hence sidestepping the problem.
When a man with a .45 meets a man with a rifle, the man with a pistol will be a dead man.
I won't be very sure about that. A pistol has better ADS afterall :P
Funnily, the exact opposite tends to happen to me a lot of times. With the cars just slowly closing in on me from the side.
All you need is good airflow.
Oh no, you're getting it wrong.
I only found the person responsible for giving me the feeling of helplessness and made them helpless.
The other people's lives?
Well, I just pulled of the lever, so now nobody has the opportunity to make that choice, hence no dilemma.
And who got run over in the end, I didn't check. I didn't know whether or not the direction got changed when I was breaking off the lever.
Also, I didn't really stop the train either, so I only stopped the dilemma from happening. I didn't save any ppl.
Seems to be fanart based on Warhammer 40000. Another rabbit hole.
If you end up reading enough to understand the context, please let me know too.
Nice.
But it says copyrighted. I don't think they want us to use it as a Wallpaper
You can also check out the wallpaper submission threads on KDE Discuss. They tend to give both versions for selection as the official theme. They also tend to use the CC BY-NC-SA 4.0 license, which is ideal for wallpapers.
Are we talking about the same Chuck Norris?
No, we are not.
I am talking about an internet meme
You are talking about a real person, who is probably old by now.
I have a multiboot system. One of the installed OS's does not use the NVMe SSD installed on the motherboard at all. At the time of taking the screenshot, all the SSD partitions are unmounted, so apart from detection, the SSD is mostly unused.
- I would like the temps to drop down to SYSTIN (≈35°C) levels.
- I know, it's right next to my GPU, but I am not doing anything GPU intensive, the GPU temps are ~37°C ^[apart from GPU memory, which is 48°C due to the awful AMD 7th gen Zero RPM, which has no workarounds on Linux]
For the unmounted and unused HDDs, I just use hdparm -Y, but there seems to be nothing in terms of that for the SSD.
And even though I appreciate the additional heat in winters, this is going to be too expensive for me. I'd rather burn some cheap Nichrome than my data storage device.
I checked out a Debian forum thread and from that, I checked the following:
sh ❯ sudo nvme get-feature /dev/nvme0 -f 2 -H get-feature:0x02 (Power Management), Current value:0x00000004 Workload Hint (WH): 0 - No Workload Power State (PS): 4
Showing it is already in the lowest power state.
I have no active cooling setup for the SSD from my side. This becomes relevant soon.
-
Checking the SSD temps (using the same widget as in the image), the temperature on Sensor 2 starts out at ~40°C (after a normal reboot) and slowly increases to >50°C as shown at the start of the graph. Power State (PS) is still 4.
-
Running KDE
partitionmanager, which probably does some reading to check the partition information, at 50°C stage, causes a temperature drop, as shown in the image. -
Running KDE
partitionmanagerright after reboot, when the temperature is increasing very sloowly, seems to do nothing significant.
___
- Turns out that after a few minutes of System Standby, the SSD doesn't return to
PS: 4, so I have the culprit. - Running
partitionmanagerafter that causes it to go back toPS: 4
So we have a solution! All I need to do is run partitionmanager on wake. nlol jk
___
Motherboard: MSI MAG X570S TORPEDO MAX (MS-7D54) SSD: Samsung 980 512GB (correct firmware, bought long before the fakes started coming out)
Until he actually had to use it.
Took 2 hours of reading through examples just to deploy the site.
Turns out, it is hard to do even just the bash stuff when you can't see the container.