It may try to connect to open wifi networks instead, maybe
It'd be cheaper, sure. But that assumes anyone actually wants to run things locally. My VP is an elderly woman who would love to get off the Board as well. We just don't have volunteers to run things. I joined up so our HOA didn't get handed to a lawyer to run, which would cost even more.
Prior to having a management company, the HOA treasurer embezzled about $40,000. It's the reason they got the management company in the first place.
These allegations have been talked about for MONTHS now and I've yet to see any convincing evidence of wrongdoing. Potential victims should absolutely have their voices heard, but I'd like facts over emotions. All I've seen is he said/she said about this whole situation.
From an article I read last week, it's an accessibility thing. Front window needs to be low enough for short carriers, and the vehicle needs to be tall enough for a tall carrier to stand in.
Looks silly, but pretty well thought out.
Getting out of it is the hardest part for us right now.
We're in a small 28 unit condominium, so our dues go towards insurance for all buildings (only exterior, have to have our own for studs in), water, lawn service, management company, etc. Our dues are almost $400/month.
Yes, per month. It absolutely blows, especially when we're trying to sell our unit and it's been on the market for almost half a year.
I'm the HOA president so I know what all our expenses are (and have fought to keep increases to a minimum, including negotiating the community water bill with the water company), and unless we kick out the management company (Not going to happen) the dues are just going to stay high. We're preparing to refuse an increase for the next year.
My guess is that it may not be factoring traffic conditions for bicycle directions
Guessing it's the Litter Robot? We've got one as well. Our youngest cat constantly tries to play in it while it's doing a cycle
Yeah, this isn't uplifting at all. It's just sad
This is a great thread for finding new people to block
I'm in healthcare, and it would be such a huge HIPAA risk if this was rolled out to our users. I'm interested to see what the company will do with this new information. We're Enterprise edition so I'd assume they have ultimate control over it being on our computers.
They already do when you leave a mess or destroy property. That's not unusual and acts as a deterrent
Fun fact! Glue is put into the cheese on pizza slices for promotional purposes. It's what gets them that nice stringing stretching cheese on video.
Got any peer reviewed scientific evidence for your positions?
I've got both going for dual cloud backup. Immich is hosted local so I've got a backup at home, and I pay $5/month for 500GB storage with Google
I'm working on 3D printing the Kubic case, but would like some guidance on hardware to buy for it.
I currently have an old laptop running some Docker containers, including the .arr stack and Plex, plus Immich for photo backups, and a few other odds and ends. Don't want to break the bank, but I'm looking for something to at least handle transcoding video for Plex.
Needs:
- ITX Motherboard
- Discreet GPU (Max 210mm long, 2 slots thick (max 41mm))
- SFX Power Supply
- 140mm chassis fan (Max 30mm thick)
Thanks in advance!
Hello fellow self-hosters,
I'm fairly new to hosting my own services and have been learning as I go, but have run into an issue and am not sure where to look for answers. Hoping you all can help a confused soul out.
Up until now, I've been running the .arr services (Sonarr, Radarr, Overseerr, etc.) on my Windows machine with minimal issue, but I've been working on setting up a separate Debian machine to get it off my main PC.
I'm following this guide to get everything setup, and at this point I have all my services setup and running, but I can't seem to get Radarr and Sonarr to work correctly. My indexers work, Radarr will grab the wanted file and Deluge will download it, but when the download finishes it just stays in limbo; Radarr is unable to import it into the library due to invalid permissions (It doesn't have Write permissions).
I've done sudo chown -R $USER:$USER /path/to/ROOT/directory and sudo chown -R $USER:$USER /path/to/HDDSTORAGE/directory as the guide instructs under 'Folder Structure' (of course replacing the paths with my actual paths), but to no avail.
Where I think the problem is is my actual Media Library. All the services are running on their own laptop, but my 10TB HDD is still in my main Windows PC. Until I build a new rig specifically for the server, I can't put the HDD into the laptop. In Windows, the TV and Movie folders are network shared and I have them mounted on my server in the respective locations where Radarr and Sonarr should be looking. At this point, the .arr services can definitely read the mounted directories, but can't make new ones for new shows and movies.
Pacific Northwest, southern Washington. Found during a walk in the woods
Anyone have any solutions for this issue? You'd think it would just bridge over the entire hole, don't know why it's doing this. We're at 195mm height here and I'd rather not run a support the entire height of the model just for this little nub.
Using version 2.6.1
Edit: Model in question https://www.thingiverse.com/thing:5551428. Not my own, but getting some fun things printed for the Spooky season
Hello fellow printers!
I've decided to be ambitious and upgrade my printer's hotend. I followed this guide to convert my printer to a direct drive. I bought this NEMA14 motor per the instructions, but the instructions didn't specify how to wire it up to the stock Neptune 2S board. I just swapped it where the old extruder was and got everything assembled.
Started trying to tune it (Using Klipper), and things just got weird. I read that the motors can heat up while active, but this motor is getting HOT! Hot enough that it can melt PLA that's pressed up to the motor's body. Only takes a few minutes to get there, definitely can't print for long with it.
What are my next troubleshooting steps? I definitely don't want to burn my house down and will go back to my original bowden setup if needed, but I'd love to be direct drive.
Edit: Of course after I post this I finally find what's wrong. Need to tune VREF as well. I've ordered some ceramic screwdrivers to prevent accidentally frying my board and will be learning something new this weekend! Leaving this question here in case someone else needs the answer. Using this guide to tune VREF
Updated to the latest update and the app crashes immediately. Can't get to any settings, no errors are thrown. I've had to downgrade to v23.08.31.
Anyone else having problems? I can post my device info if someone could tell me how to get that.
Edit: Device info added. Also, I do have an Ultra subscription but can't restore the purchase. That's probably since I downloaded the earlier version from APKPure.
Device information
Sync version: v23.08.31-14:10 Sync flavor: googlePlay
Ultra user: false View type: Cards Push enabled: false
Device: cheetah Model: Google Pixel 7 Pro Android: 13
Took a couple failed prints to figure out something was wrong. Pulled the filament and saw it was melted WAY too high! Thankfully I've got a pack of spares, so pretty simple to swap out.
Now I need to learn how to play it...
Harley Benton DIY kit ordered from Thomann, body 3d printed.
Now to learn how to play it
Next step is learning to use filler, sanding, and painting