PolyMC has a toxic lead dev. Google it to learn more. PrismLauncher forked from it about a year ago taking nearly all the active devs, and it remains my favorite launcher of all those I've used.

Fuck PolyMC.

for me, reddit nearly always has way more quality content and news for me though for the time being

It's not just you.

As constructively as I can put this, reddit has been building community and goodwill for many years. Lemmy has only recently become an option and it's done wonderfully in the short time it's had.

The challenge is the catch 22. People go where there is more content, they produce content there, and then there is more content there. There no vacuum, reddit didn't disappear. It became toxic and people apparently care less about avoiding toxicity than filling up on dank memes.

All I can say to that is we all need to be the change we want to see in the world. Adopt a Lemmy First mentality, and go to reddit only to pick up legacy slack. Continue the conversation from there over here. Link it up.

Look forward to talking to you!

I would not be surprised to learn that you could make as much profit open sourcing the work and using Patreon instead of demanding users pay to release the shackles.

Do it your way. I will probably pay you when you come out with a widget. But I would have done that anyway. Shoving ads in my face makes me not like you.

Did this community just whiff /r/selfawarewolves

The same could be said of literally every single product that magically became way more expensive post pandemic for no justifiable reason.

I'd like to hear how you do minis on fdm. I'm planning pressing resin into service for that and a couple other things, but if you have a good workflow for minis on fdm, I have friends who want them and fdm can do it way way faster than resin at the trade off resolution.

Not so much a move as an addition. And there are a few reasons.

One, I like projects where the outcome is a useful tool, but the project aspect itself is a significant part of my motivation.

The reason for the Voron being that project is that it will be a WAY faster and more competent tool than my ender, which was a prohibitive limitation especially for larger prints. A failure at hour 23 of a 24 hour print sucks, but the same print failing at hour 3:45 of 4 hours is way easier to accept. At that point the loss of filament matters more than the lost time in my eyes.

Also Voron2 has a much better design than ender 3 pro for exotic filaments, making ABS / ASA / nylon more approachable. Better tuning options, compensation (lower / less moving mass), bigger plate, taller build volume.

The bigger plate is significant for things like ergo mechanical keyboard chassis. I'm a Dactyl Manuform user and builder, and the ender 3 pro can only print one half at a time and takes more than a full day each half. Voron should be able to knock out two halves at once inside of a work day, and do so with better quality to boot.

The ender still has a place, particularly with the mods I have on it. Specifically, TPU can't benefit from the speed of Voron, so there's no reason not to print it on ender. Also it never hurts to have a tuned, working machine if you have to take one offline for maintenance.

I'm 100% retro and linux gaming, but I don't need to force my kids down the road I'm on. I just share what I love and hope they choose it for themselves so we have common interests. So far, surprisingly, they both love NES / SNES and that's thanks to Nintendo developing the same franchises for decades, for better or worse.

I don't really game on the go other than mindless android games. If I did, steam deck makes way more sense. For the kids I keep thinking Switch mainly because they already love the Wii, and all their friends have Switches, so it's a social vocabulary thing.

Surely you're right about the satisfaction part. I need to make sure the kids are part of it, maybe choosing models and building, painting, etc with me. They are pretty young but once they get a little better spatial awareness and reading skills, python and freecad are not out of the question! They play minecraft already, so we're off to a good start I think.

If you drop your phone that much, I think this is the case you need: https://a.co/d/1fyszgF

:D

First, let's consider that up until fairly recently in human society, writing has been the domain of the wealthy and not entirely accessible to everyone. The rich could write whatever they want or patronize those who could write what they wanted for them. The rarity - relative to the greatest developments of proliferation being chiefly the printing press and recently the internet - of written works, demanded that anything someone bothered to put into physical written form must have considerable innate value to someone. If they didn't, nobody would have bothered with the effort or expense.

I no longer have access to the reference for a citation and am having trouble digging it up, but I saw (probably on a blog about AI) some figures recently describing the amount of written "material" produced by humanity on a daily basis (or some other comically short time) in 2023 being comparable to the amount produced in the ~five thousand preceding years since the written word is thought to have been invented.

With as much "writing" being produced, most of it being spam or low-effort shitposting, the signal to noise ratio is unbelievably high. Regardless of the profundity of the thought being born and described, the chance of having anything written today - randomly on the internet - recognized for its quality is infinitesimally small.

I believe that there IS a fantastic amount of truly remarkable writing being done every day all over the internet. Nearly all of it will be retained on some form of media basically forever, even until the media is woefully obsolete / destroyed / the heat death of the universe. Most of it will never be set upon by human eyes again after this weekend.

Today, like hundreds of years ago, what rises to the surface does so due to commercial pressures. If you are awesome and impress a publisher with deep pockets, your words could be preserved in a form that will be read in 2434. Of course, it will have to continue to be impressive long after most of the books selected by Oprah's Book Club.

Hey, @AvaddonLFC

I'm sure that the buyer can be expected to pay for shipping, but at the end of the day for any buyer the "price" is inclusive of all fees, and for the seller the "profit" is minus expenses. So if it's cheaper to ship using eBay's discount, that means the buyer pays more or the seller makes less.

In the end it's probably worth it for the peace of mind, though. I've personally never been screwed on a big ticket item and I don't mind selling stuff for under $100 on ebay. If I lose, it's lost, right? My feelings about eBay so far are that I'm selling there as much for altruistic reasons... I don't want the material to be landfill, someone can get a deal (I do it all the time), and I'd like to recoup some cash as well to spend on hobbies. The couple times I've been hassled and lost money on ebay, it totaled less that $50.

I'd be super upset if I got screwed for several hundred.

Apparently they are using discord now, and I might give it a shot. Might not be a bad idea to link that in the sidebar here.

I wonder if it's worth the extra cost to ship. Will have to investigate more.

That sucks.

Better they don't pay at all than they do, you ship, they complain, then return you an empty box or a broken card for a full refund.

Yes. If you are a buyer and you submit INAD, you can say anything you want and ebay will side with you. 100% of the time. Even if you lie. And if they initially don't, just keep it up and they will. Then, when you "return" the empty box to the seller, there's nothing they can do about it.

There are stories all over ebay about it. And I'm not a big seller btw, I'm just a dude who sells odd stuff to pay for new stuff. When I get screwed, which I occasionally do, it hurts because every time it feels personal unlike if it were my job.

Using Connect right now. What I really care about is a Frontpage widget like RIF. I'm holding open real estate on the main screen of my Android. Basically the first dev to have that and a decently usable interface (bonus points for a "black" mode) gets the space :)

You and I are VERY similar in that way. I was literally shopping for new parts last night for a whole new PC since this is effectively a motherboard problem.

With a decent sleep behind me, I got back at it today and flashed every BIOS from my manufacturer, backward from the newest, until I arrived at one that didn't have the GPU issue which I thought was caused by the moth. It turns out that it was not, in the end, the bug's fault.

Having started on Friday morning with the very first manufacturer BIOS, which shipped with the board, I knew that it worked in a stable fashion but was missing a key feature for my new hardware. By the time I found one that once and truly didn't exhibit the issue that was crashing my GPU, I was back to the 3rd BIOS release and now I think we are at "stable."

The board in question, in case anyone finds this on a search engine, is the Gigabyte Aorus Z690 Ultra DDR4, and the shipped bios is version F3. My video card is a Gigabyte RTX 3060Ti, and the bug causing hard locks / crashes is present in every BIOS from F20 and upward. Version F6 has another issue I didn't bother to diagnose that was causing instability for unknown reasons. F8, however, works just as well as F3 so far, though I want the rest of the weekend to test. So far none of the F20 series issues are in the journal though, so I think that's where the issue was introduced.

And for Gigabyte haters, I feel you, but it's a SFF build and I needed a mITX Z690 board and a 3060Ti that was short enough to fit in a NF200 case built at the peak of the GPU shortage which only made things more complicated. My options were serendipitously limited to that manufacturer. :)

I've been in IT a long time and building PCs for longer, but my debugging skills degrade in direct proportion to how frustrated I am by the problem. That usually starts off very high and gets higher as obvious things get checked off the list.

Evidently I still have some kind of problem, because the GPU just fell off the bus again... but I haven't had any frame rate issues in the last hour, so I think it's a coincident problem and maybe not related to the moth. I did just update a BIOS, so I dunno. Too late to worry about it tonight.